Crate Washer


  • TYPE: SINGLE ROW WITH TWO TANKS.

  • CAPACITY: 15 Crate per Min. 900 Crate per hour

  • Plastic crate size:540MM L*360MM W*295MM H

  • MACHINE DIMENSION: 3000MM (L) X 1216mm (W) X 1395mm (H) MM.

  • CONVEYING TRANSMISSION MOTOR: 1 HP MOTOR

TRANSMISSION SYSTEM: 1 SET. (INVERTER)

  • WATER PUMP: 5 HP X 2 PCS.

SPRAY NOZZLE: 1 SET.

SPRAYING PRESSURE: 2 BAR.

SPRAYING PIPE MATERIAL: MADE OF SUS304.

STEAM CONTROL VALVE IS FLANGE WITH ON /

OFF SOLENOID VALVE X 1 TYPE.

FILTERMANOMETERSENSOR PROBEBALL

VALVE X 1 SET EACH.

AUTOMATIC TEMPERATURE CONTROL.

STEAM CONSUMPTION: 70 KG / HR.

STEAM PRESSURE: 3 BAR.

TOP CHAIN CONVEYOR: MADE OF SUS304.

CONVEYOR X 1 SET.

ALL THE DRIVE MOTORS ARE CLOSED AND WATER

PROOF TYPE.

WATER TEMPERATURE IS ADJUSTABLE.

SIGHT GLASS X 1 SET.

  • WATER TANK INCLUDES FILTER MEMBRANE.

  1. EMPTY CRATES ARE TURNING AND CONVEY TO CRATE WASHER FOR CLEANING.

  2. SPRAY HEADS ARE DISTRIBUTING AROUND: THE OUTSIDE AROUND THE CRATE, UPPER AND LOWER, FRONT AND

    BACK, LEFT AND RIGHT, ALL HAVE SPRAY NOZZLES FOR

    WATER SPRAYING.

  3. CLEANING DEVICE IS CLOSED TYPE.

  4. IN FRONT OF THE WATER PUMP HAS FILTER DEVICE DESIGNED AND IT’S FOR GARBAGE NOT TO ABSORB INTO PUMP AND DURING THE CLEANING OF FILTER

  5. MEMBRANE, IT’S EASY TO OPERATE.


SPRAYING TIME AND CALCULATION METHOD FOR

EMPTY CRATE INSIDE THE CRATE WASHER:



洗箱烘乾機

型 式: 單排單槽式(冷水清水槽)

機 械尺寸: 3,075mmL x 1,200mmW x 1,310mmH,附 有加強樑(SUS304)

輸 送鏈條傳動馬達: 1/2HP東元馬達附減速機

馬 達: 東元10HP, 三相, 60Hz

噴 霧角度: 40

噴 水管材質: SUS304

出 水量: 60L/min at 60kg/cm2

輸 送鏈條: SUS304

機 體、水槽材質: SUS304

噴 霧量: 9.8L/min at 60Kg/cm2

變 頻器: 1

機 台底部有加強樑,增加機台的結構強度

電 氣操作盤(SUS304、防水型) x 1

電 氣控制及配線等一式

冷 水清水槽弣過濾器

本 機性能: 空箱用人工倒置方式進入洗箱機清洗

噴 頭分布:箱內外面之上下、前後、左右皆有噴頭直接噴洗

清 洗裝置皆於密閉室完成

水 泵前有過濾裝置其設計為使垃圾不被吸入泵,於清理過濾網時操作容易